IPC Signal Generator & Amplifier

IPC Signal Generator & Amplifier

This combined signal generator and amplifier can be used in 2 different modes - as a Signal Generator with amplifier or as a stand-alone Amplifier. Uses include driving a Loudspeaker or Vibration Generator and amplifying external signals. Housed in a robust powder coated steel casing.

In Signal Generator Mode the unit can provide Sine, Square or Triangle output waveforms via a rotary switch. Output frequency ranges from 0.1 Hz to 100 kHz and is adjusted via a frequency range switch and a fine adjustment control. The output frequency is shown continuously on the LED display. Output can be as a low or high impedance signal, via 4mm sockets, depending on the requirement.

In Amplifier Mode the unit can be used to amplify external signals. The signal to be amplified is input via 4 mm sockets and then output as an amplified signal to a loudspeaker etc.

Signal generator & amplifier:
Output amplitude of waveform 0 to 10V max. peak to peak
High impedance (600 ohm) or low impedance (4 ohm) output via 4 mm sockets
600 ohm signal output can be attenuated by x1, x0.1 or x0.01
Output signal power max. 4W (rms) into 4 ohms
Suitable to drive speakers or vibration generators (4 ohms to 15 ohms)

Amplifier:
Voltage gain 0 to 100 (+40dB) via the rotary control
Frequency response 1Hz to 100 kHz (-3dB bandwidth)
Input impedance 1M ohm
Input voltage max. 200mV peak to peak

Shipped from our Manchester, UK Facility

All orders are securely packed for safe delivery and dispatched from our Manchester warehouse, ensuring dependable UK service.