30 Litre Incubator with Window Door

The Genlab General Purpose Incubators offer a range of highly efficient, reliable, cost effective units to suit most biological analysis, research and general laboratory application. 

The exterior is constructed from sheet steel finished in an easy clean powder coated paint. The interior chamber is made from mild steel coated with aluminium (CLAD). Fitted with fixed shelf runners and removable chrome plated wire grid shelves. The top vent is fitted with a clip to hold a glass immersion thermometer. The controls are below the door. The incubators have a solid steel door as standard or as an alternative a door with an integral viewing window, not available for the incubator/sterilisers. The control system comprises a direct reading thermostat and overheat thermostat both with calibrated scales and tamper proof locks. They also include a main switch with indicator and heat and overheat indicators.

Incubator specifications:

- Ambient +5 to 220°C

- Ambient +5 to 60°C with window

- Safety overheat thermostat to DIN 12-880 Class 3.1

- 230V Mains supply

- Full 2 year warranty

30 litre Incubator with Window Door

500W, 3 shelf positions.

Internal Dimensions: 240 x 360 x 350 mm  (h x w x d)

External Dimensions: 500 x 480 x 490 mm  (h x w x d)

Q = The actual temperature in my incubator does not match the setting on the dial. What can I do about this?
A = The supplier has given the following instructions to adjust the dial to match the actual temperature:
 These incubators are easily calibrated using the white dial.
 You will need to remove the white cap. Behind this there is a locking nut. This nut ensures the dial moves with the spindle so when you loosen it, the dial moves without the spindle through the centre.
 Reposition the dial to match the calibrated reading on the blue scale and then tighten back up.
 The unit will now be recalibrated.